Top 12 Best Thorogood Work Boots Reviews (What You Must Know Before Buying)

Hey, welcome to our Thorogood work boots review for 2022 (updated for 2023).

Editor’s Choice

Best Thorogood Safety Work Boot

We’ve put together a list of the top 12 work boots from Thorogood and our #1 recommendation based on what we’ve found in our research is the Thorogood Men’s American Heritage 6″ Moc Toe with wedge sole.

To bring you this article, we’ve researched over 25 websites, dived through countless spec sheets, and read hundreds of reviews and customer feedback for each boot that made the cut to be on our list.

Overall, we’ve spent close to 44 hours of our time looking into the top-rated and customer-favorite Thorogood work boots to bring you the most important information for each one.

A while back, we wrote about our list of the world’s most comfortable work boots, but many of you reached out and pointed out that Thorogood wasn’t on the list.

We thought it through and realized that with a brand as diverse as Thorogood that’s been in the work boot game for more than a hundred years, it was time for a dedicated full-on review.

You can jump straight into the Thorogood work boots reviews section or go to the buyer’s guide first (if you’re new to this type of boots)

Our top 12 best Thorogood work boots choices

Here’s a quick comparison table if you’re curious about which Thorogood work boots we’ve included in our round-up.

1. American Heritage 6″

  • Made in the US
  • Wedge sole
  • Soft toe

Thorogood Moc Toe (Non-Metalic) Work Boots

2. American

  • Made in the US
  • Synthetic sole
  • Steel toe

Most Comfortable Steel Toe Thorogood Work Boot

3. GEN-Flex Series

  • EH rated
  • Oil & Slip resistant
  • Composite toe

Thorogood Composite
Toe Work Boots

4. Hellfire

  • Flame & heat resistant
  • Abrasion resisting
  • Steel toe

Thorogood Hellfire Work Boots For Firefighters

5. Heritage Wellington

  • Waterproof
  • 100% leather
  • Steel toe

Thorogood Waterproof Wellington Work Boots

6. Combat GEN-Flex

  • Waterproof
  • Gen Flex Outsole
  • Soft toe

Thorogood Tactical
Work Boot With Side Zip

7. Wellington Metatarsal

  • Waterproof
  • Composite shank
  • Composite toe

Thorogood Work Boots With Metatarsal Protection

8. Logger Series

  • Waterproof
  • 100% leather
  • Steel toe

Thorogood Work Boots
For Loggers

9. Hunting Series

  • Waterproof
  • 100% leather
  • Soft toe

Thorogood Hunting
Work Boots

10. Crosstrex Series

  • Waterproof membrane
  • 100% leather
  • Soft toe

Thorogood Hiking
Work Boots

11. Deuce Series

  • Removable footbed
  • 100% leather
  • Composite toe

Thorogood Side-Zip
Combat Work Boots

12. Infinity FD Series

  • Waterproof
  • 400g Thinsulate
  • Composite toe

Thorogood Insulated
Work Boots

What You Must Know About
The Thorogood Work Boots

Who makes Thorogood work boots?

Thorogood work boots are made by the Weinbrenner Shoe Co., a company that’s been in the work boot-making business ever since the 1800s.

To give you a bit of backstory on how the Thorogood brand came to exist; back in the early 1910s, Weinbrenner Shoe Co. shifted from initially being in the cobblery business and started producing boots that were designed for specific jobs to address the needs and requirements of workers in different industries.

A concept that was pretty bizarre at the time but nevertheless gained popularity quickly even amongst the US Army.

By 1917, the company’s specialized premium heavy-duty work boots were introduced under the Thorogood brand, a name that’s been a worker’s favorite and trusted ever since.

Where are Thorogood work boots made?

Born and bred in the US Midwest, Thorogood’s work boots are union-made in the company’s factories located in the heart of the state of Wisconsin in Merril and Marshfield, which is where they’ve been produced since the company was created.

Thorogood is also one of the few remaining companies that still craft the majority of their work boots in the US along with being made by labor union workers, making them by all definitions made for workers, by workers.

Here’s where you can check where are work boots brands manufacture their boots if that’s something you’re interested to learn.

Who sells Thorogood work boots?

You can find Thorogood boots at most local safety boot and work boot footwear dealers.

Not to mention also being available on several online retail outlets such as Amazon, TheUnionBootpro, Boot Barn, MidwestBoots, as well as other authorized online stores listed on Thorogood’s website.

Are Thorogood work boots comfortable?

When it comes to working boots, comfort is right at the top of the list of requirements to be even worth considering, and at that, Thorogood passes the test.

Despite their rugged and sturdy look on the outside, Thorogood’s line of work boots are designed to be lightweight and are as equally comfortable as they are durable, allowing you to keep them on your feet for 8 hours straight and still feel snug.

On the inside, Thorogood work boots feature cushioned insoles and anti-fatigue materials to let you stand comfortably on your feet while you’re on the clock without feeling the brunt of a busy day’s workload.

Are Thorogood work boots waterproof?

Yes, several Thorogood work boots are waterproof. The company’s top line of work boots doesn’t even consider waterproofing to be an added option – it’s a necessity.

Since their work boots are created to endure some of the toughest and harshest job sites imaginable, it’s no surprise why waterproofing comes as standard.

Does Thorogood offer a warranty on their work boots?

All work boots bought from authorized resellers of Thorogood’s footwear benefit from a yearlong warranty, provided you have the original receipt.

However, do keep in mind that just as with other products, the company’s warranty only covers defects and issues from the factory, and since we’re talking about work boots which are by design meant to take a beating, damage from usage isn’t covered by their return or warranty policy.

Are Thorogood work boots true to size?

Thorogood boots are designed to be true to size, but as any customer review will tell you, there are some essential factors that you need to consider before choosing a size: 

#1 – If they’re lace-ups

A lace-up boot’s tightness can be adjusted based on how tight you want them to be, so if your work boots feel like they’re sliding off or are too tight despite being able to move your toes freely; you just need to make a tighter knot.

#2 – If they’re a pull-on

Unlike lace-up boots, you can’t change how tight your work boots will be, so you’ll want to make sure the work boots you buy are half a size bigger so that they won’t be too tight on your foot.

#3 – If they have a safety toe

Work boots with a safety toe should be half a size larger than your foot size to accommodate your foot’s flexibility, this applies to all work boots, Thorogoods included.

Don’t go overboard though, if your feet aren’t protected by the boot’s tip, then you won’t be benefiting from a safety toe boot’s main purpose.

#4 – If you wear thick socks

The type of socks you wear might not seem like a big deal, but if your work boot doesn’t have enough space for your foot, you’ll end up restricting your foot’s movement and trap excess heat.

So, it goes without saying that you’ll want to go half a size larger just to be on the safer side.

Remember, the golden rule is that if you need to force your foot into a boot and struggle to wiggle your toes or have to yank off your boots with force to get them off, you need to go a size or half a size larger; otherwise, you’ll be set for a sore foot before your shift is even over.

Still not sure about how to get the right fit? Continue reading to find out how.

#5 – Thorogood work boots size chart

If you’re feeling a bit uncertain about which size is right for you and are worried about getting the wrong size, we feel you, especially since your ability to perform your job counts on it.

Worry not though, Thorogood has a size chart that uses industry-standard measurements that you can use to get to the bottom of what’s right for your foot.

Alternatively, follow these steps and check out the size table taken from Thorogood themselves to know what’s your boot size:

  • Put a paper on flat ground and stand on it while wearing slightly thick socks
  • Use a pen to mark the end of your heel and the tip of your big toe 
  • Measure the space between the marks you drew and use the below inch-to-size table to determine your foot size
  • If your measurement happens to be between two sizes or you have a foot larger than the other, go for the larger measurement.

Thorogood’s work boots aren’t just limited to men; some of their work boots are available in smaller sizes that accommodate female workers’ feet.

To know which Thorogood women’s work boots to get, use the size conversion chart below to determine the correct size.

For example: For a women’s size 6, go for a men’s size 4 boot

AA3 1/4″E4 1/8″
A3 7/16″EE or W4 5/16″
B or N3 5/8″EEE or XW4 1/2″
C3 13/16″4E or H4 11/16″
D or M4″6E4 7/8″

What do users/owners say about Thorogood work boots?

Many users that wear the Thorogood work boots love that they are durable and USA-made. 

The comfort level of work boots is essential. The Thorogood work boots are great when you’re on your feet all day on dry, wet, hot, and cold surfaces, as tested by these boots owners. 

Users of the work boot find it so comfortable that some have compared these boots to running shoes or even tennis shoes. 

Many reviews have commented that these boots do not take long to break in (at most around (6 days). However, some have noted that the boots run big, so it’s better to get them a half size smaller. 

Another remark some of the users made is that the white sole looks excellent aesthetically And although you can clean your dirty work boots it won’t last long since the white color is a dirt magnet. 

What colors do they come in?

Thorogood work boots come in a variety of primary colors ranging from:

  • Black
  • Brown 
  • Tobacco
  • Mahogany
  • Crazyhorse
  • Butterscotch
  • Black walnut
  • Studhorse brown

While you won’t find bright yellow and extravagant colors as you would on a pair of Vans, Thorogood’s work boots pack in sleek looks with a no BS attitude.

And depending on the model, their work boots tend to feature combinations of color accents and aesthetics in the welt-stitch and outsoles with colors varying from black all the way to translucent and white.

The different work boot heights made by Thorogood

If you’re on the hunt for a pair of work boots (hint: scroll a bit to check out the top-rated models) but your job requires a specific height or style, you’ll pretty much have no shortage of options with the different line of work boots made by Thorogood that start at 6 inches and go all the way up to 17 inches.

So, whether you work with concrete or literally are deep in the muck, there’s a Thorogood out there meant for the job.

Does Thorogood make work boots with a zipper?

Yes, Thorogood does make work boots with zippers. Here are three of their most popular models designed for people who just like to zip up and head to work:

  1. Pull-on boot w zipper
  2. Combat boot w zipper
  3. Hiking boot w zipper

If you’re on the lookout to get more details about which boots to go for that include a zipper, we’ve included some of Thorogood’s best zippable boots right down in our review.

What industries are Thorogood work boots good for?

Tested and certified to meet and exceed the strict safety standards of the American Society for Testing and Materials (ATSM) and based on the insights we’ve gathered from scouring through endless reviews from workers in various professions, Thorogood work boots are the perfect fit for:

And the list goes on.

Simply put, if you operate a demanding job that needs reliable workwear, Thorogood is a brand you’ll want to look at if you want boots that won’t quit on you.

The reason? Thorogood has been in the work boot-making business for over a century with its very origins tied to heavy-duty industries like mining, construction, and the petroleum industry.

And to this day, the company lives up to its legacy of giving working men and women the grip and durability needed to march on through a busy day to earn a living without compromising the comfort and safety of their feet.

Can you resole Thorogood work boots?

Yes, Thorogood work boots can be resoled and repaired; the company even has an in-house restoration service to get your work boots back in shape by the hands of the very craftsmen that made them in the first place.

It’s not every day that you see a company provide their own boots restoration service, so we were rather impressed to see Thorogood go the extra mile to extend the lifespan of a customer’s purchase.

Danner vs. Thorogood work boots 

If you’re looking for American-made work boots, you’ll find Danner right there next to Thorogood at the top of the list when it comes to durability and safety.

Like Thorogood, Danner has a long history of being a worker’s favorite, especially in harsh outdoor terrains and extreme weather conditions.

While there are more similarities than there are differences between the two, Thorogood work boots have more distinct-looking models and require little to no breaking-in.

Compared to Danner work boots which tend to stick to a traditional appearance while also having several reviews that mention how stiff their work boots are around the ankles and need to get broken into for about a month until they feel right.

Red Wing vs. Thorogood work boots

When you think of moc-toe work boots, you’re either going to think of Red Wing or Thorogood; two of the most iconic American work boots brands famous for producing moc toe boots that constantly go neck to neck against each other in most reviews.

While we can go on and on about aesthetics and design details, we’re here to settle the score once and for all between the two from a worker’s perspective and break it down.

Both work boot brands are made out of durable leather and look very similar, but that’s where the similarities end. 

Thorogood boots on one hand are designed to be worn in job environments and pack in more foot support and protection for heavy-duty workers.

On the other hand, Red Wing’s boots tend to be lighter and more flexible for lightweight work.

However, that comes at a cost of having fewer safety and support features to handle extreme conditions. 

Irish Setter vs. Thorogood work boots 

If you’re used to working with heavy equipment, you’re bound to see other workers revving a pair of Irish Setters or Thorogoods, and it’s not hard to see why since both work boots rank very close to each other in terms of safety features and ruggedness.

While both brands pack a punch, the main difference between these two heavyweights is the difference in their prices.

Irish Setter work boots are imported and often come at a lower price point, whereas Thorogoods are handcrafted and assembled in the United States by unionized workers, causing them to be slightly more expensive.

However, in terms of quality both match up to each other since Irish Setter is made by the same folks that produce Red Wing’s premium leather work boots.

Overall, choosing between Thorogood and Irish Setter work boots ultimately just comes down to preference.

Carolina vs. Thorogood work boots 

Equally matched in both their origins as companies that specialize in work boots for different types of jobs, Carolina and Thorogood boots share most of the same safety features and the ability to be resoled which you’d come to expect as a standard from premium boots of such caliber.

While not exactly a major difference, the main difference between both brands lies in the styles that they produce across their lines of models which look distinctly different from each other. 

a person walking through water wearing a pair of great thorogood work boots

Reviews of the top 12 best Thorogood work boots

We’ve put together a list of the top Thorogood work boots that stood out from the crowd and won over the hearts of workers.

Without further ado, here are our top 12 picks for the best work boots from America’s favorite job-fitted footwear maker:

1. Thorogood 6″ Moc Toe

Best Soft/Non Steel Toe Work
Boots From Thorogood

Putting style center stage while taking comfort to the next level, Thorogood’s American Heritage 6″ is right at the top of the list for more than just its style.

Available in steel toe and non-steel tip variations, these work boots stand out for having little to no breaking-in required while providing just the right amount of cushioning in the insole, outsole, midsole, and shaft.

Also featuring a lightweight fiberglass shank to maintain proper body posture and foot support for workers that need to stand for hours on end.

Don’t let their stylish appearance fool you though, these bad boys are designed to be durable and endure the rugged work conditions that everyone from steelworkers to police officers deal with.

And that’s thanks to a triple-stitched outsole and shock-absorbent footbed to march on through the day and keep a firm foot on the ground.

Designed to last and keep on going, the Moc Toe American Heritage 6” packs in rugged shoelaces that handle the brunt of all the friction that the boot will endure. And as an added benefit, these work boots are crafted to be easily repaired if you do manage to go beyond its limits.


  • Comfortable design
  • Goodyear storm welt construction
  • Durable full-grain leather upper
  • Metal eyelets and hooks
  • Removable footbed
  • ASTM rated F2413-05 M/I/75/C/75 electrical hazard protection Add your text here
  • Fiberglass shank
  • Slip-resistant


  • Not waterproof
  • No insulation

2. American Heritage – 6″ Trail Crazyhorse Safety Toe

Most Comfortable Steel Toe
Heritage Work Boots

Aesthetically blurring the lines between moc-toe boots and proper work boots, the American Heritage 6” are by all means a pair of work boots that are not to be underestimated.

Armed with a steel-toed tip and heavy-duty crazy horse leather, these boots are scratch-resistant and feature 1-inch heels and grooved slip-resistant insoles to let a worker firmly set foot on any edge without breaking a sweat.

Lined with a composite shank, the American Heritage 6” work boots also provide good ankle support, not to mention a bit of extra height thanks to their raised heel.

To the interior of the boot, you’ll find a cushioned EVA insole that’s also shock absorbent coupled with a breathable cotton lining to keep your feet dry from built-up sweat.

The boot is available on 8-inch height as well. Find it here if you’re interested.


  • Goodyear welt construction
  • Removable EVA insoles
  • Electrical Hazard-resistant
  • Slip-resistant
  • Composite shanks
  • Steel-toed tip


  • No insulation
  • Not waterproof

3. Gen-Flex2® Series – 6″

Best Composite Safety Toe Work
Boot From Thorogood

Named after their flexible GenFlex2 rubber outsoles, Thorogood’s GenFlex work boots feel as good as they look and are made for every worker who needs to step foot confidently and lead the way to get things done no matter the challenge ahead.

The highlight of these boots is their lightweight yet highly durable outsole that’s made to give workers reliable traction and support while being flexible enough to match a foot’s movement.

Over to the opening, the GenFlex’s heel cup cushions the foot while providing ankle support to keep movement steady no matter how uneven the surface it’s treading on. 

On the inside, Thorogood’s craftsmanship and eye for comfort start to shine once your foot gets snug between the padding that lines the interior of the boot all the way to the removable EVA insole that’s backed up by a second layer of padding under it. 

Featuring a composite toe tip with a rubber coating, the GenFlex is just the right balance between style and safety with the added benefit of not getting flagged at job sites that utilize metal detectors and screening devices.


  • Composite toe tip
  • Composite shank
  • Slip-resistant
  • Shock-absorbent 
  • Goodyear welt stitch 
  • Ankle support


  • Not waterproof
  • Not insulated

4. Hellfire Rubber Insulated 14” Felt Boots

Hellfire Work Boots For Firefighters

Constructed out of flame-and heat-resistant rubber, these work boots from Thorogood live up to their name and are without a doubt a firefighter’s ultimate companion.

Featuring a streel triple ladder shank and a vulcanized rubber outsole for maximum grip and traction, the Hellfire Rubber Insulated defines hardcore protection for what’s arguably one of the most dangerous jobs.

That’s where proper safety can mean the difference between life and death as well as saving the lives of others.

Thorogood wasn’t messing around when they made these boots, and they’ve packed everything from a steel toe tip to certifying them to be considered proper firefighting work boots by the National Fire Protection Association.

Despite how hardcore these boots look and their equally matching name, the Thorogood Hellfire boots features a 3.5mm lining of flame-resistant soft polyester with extra reinforcements around the heel to provide extra padding.

Not to mention that it features a removable polyurethane footbed covered with Super knit to keep a firefighter comfortable even in the most heated scenarios.


  • Vulcanized Rubber upper
  • Steel shanks
  • Comfortable polyester insulation 
  • Shockproof
  • Cushioned shin guards
  • Waterproof
  • Certified NFPA 1971, Standard on Structural Fire Fighting 
  • Certified NFPA 1992- 2012 for Hazmat
  • Steel-toed tip


  • Not the most lightweight option

5. American Heritage – 11″ Wellington Safety Toe

Best Thorogood Wellington
Work Boots

Right from the get-go, Thorogood’s 11” safety toe pull-on work boots are crafted to let workers simply slip them on and get down straight to getting work done hassle-free.

Featuring a wedged outsole with a pattern designed to let you easily kick-off or scrape gunk away and walk on mud confidently.

These boots are designed to let your feet stay dry down to the last step even in extremely hot temperatures due to being made exclusively out of a crazy horse leather vamp that’s directly sown to the wedge.

Making these pull-on work boots one of the most flexible steel-toed work boots out there to stay safe while climbing on ladders, mountains, or any other task that’ll have a lot of bending and foot movement involved.

Over to the bottom of the boot, the 90-degree heel is backed by a fiberglass shank that lines up the boot, and to the interior, your foot gets a double dose of comfort with a Poron insole and a removable shock-absorbent footbed.

Sliding into these 11” Wellington work boots is also remarkably a breeze since they come with a durable heel cup coupled with a wide opening and curved entrance that lets you slip in and lock them in place. 


  • Goodyear storm welt construction
  • Durable full-grain leather upper
  • Steel-toed tip
  • Slip-resistant
  • Lightweight
  • Removable 
  • Composite shank


  • Unlined interiors make it not ideal for jobs with sharp objects
  • Not waterproof
  • Not insulated

6. GEN-flex2 8″ Combat Side Zip Trooper

Best Tactical Work Boots
With Side Zip

When you need military-grade foot power, Thorogood’s is a brand you can count on to guard your feet.

A fine example of Thorogood’s top of the line work boots is their Men’s Trooper 8” Side Zip Tactical Combat Boots which pack in every form of protection under the sun to ensure that no matter what’s waiting for a worker once they clock in, they’ll be ready to stomp through it.

These boots have been designed to let anyone wearing them be ready for emergencies and unexpected situations.

So whether you’re walking in a contaminated area or climbing up a muddy hill, the Tactical Side Zip Trooper work boot has got you covered with safety features such as pathogen resistance and Thorogood’s insanely flexible and lightweight Gen-flex2 rubber outsoles that allow anyone wearing these boots to move freely and quickly.

A side zipper straddles the sides for quick and easy entry to suit up and get going.

While a Velcro flap adds an extra layer of protection for even the most paranoid workers out there worried about their boots sliding off their feet, which shouldn’t be possible since these boots contain a composite shank that keeps your feet both safe and firmly in place.

Material-wise, the uppers of these boots are made out of a combination of nylon and full-grain leather to get the of both worlds for maximum comfort and protection.

On the inside, the tactical Side Zip Trooper includes a cushioned interior and shock absorbent footbeds topped with a dual-density insole that makes this boot not just a powerhouse of safety features, but a pleasure to wear and stay comfortable while at it.


  • Goodyear storm welt construction
  • Composite shank
  • Removable footbed
  • Composite toe tip
  • Heavy-duty YKK zipper
  • Velcro straps
  • Pathogen-resistance 
  • Flexible outsoles
  • Waterproof
  • Shockproof
  • ASTM F2913 compliant slip-resistance


  • Somewhat heavy
  • Can be somewhat squeaky

7. Wellington Metatarsal Guard I-MET

Great Thorogood Work Boot With Metatarsal Protection

When you need all-around safety, Thorogood is a name you can count on, and with their metatarsal line of work boots that essentially act as an exoskeleton for your foot, you can rest easy knowing you’ve got top of the line protection from every possible corner.

An all-around powerhouse when it comes to foot safety, Thorogood’s Wellington Metatarsal Guard I-MET2 work boots are one of the brand’s top-of-the-line choices to keep both your worker’s feet steady and guarded against heavy and sharp objects at the job site. 

Supported by a composite shank and an extended composite exoskeleton topped with full-grain leather and a hinged rubber outsole designed to provide extra traction even on the slipperiest surfaces, these work boots are a winning choice that stands next to the dictionary’s definition of reliability.

Comfort-wise, workers will be pleased with the Wellington Metatarsal Guard I-MET2 since it features Thorogood’s signature padded interiors and comfortable footbeds that add extra support with every step.


  • Goodyear storm welt construction
  • Composite shank
  • Removable single-density footbed
  • Composite toe tip
  • Waterproof
  • Durable outsoles
  • Composite exoskeleton


  • Not insulated
  • Not lightweight

8. Logger Series 9″ Waterproof Safety Toe Boot

Thorogood Work Boots For Loggers

A logger’s boots by all definitions, the Thorogood Logger 9” work boots are made to let workers stand their ground with a Vibram outsole that provides unmatched traction on surfaces.

Before you ask, yes, these are designed for actual loggers, meaning that they meet the requirements of workers that need to get up and climb trees while staying safe from the elements of mother nature.

The soles of these boots aren’t just all about traction, they’re slip-resistant, heat-resistant, and oil-resistant and stand their ground against oily surfaces. While the steel-toed tip and steel shank act as a barrier from impacts or heavy tools that would otherwise slice into your foot.

Made with a “safety comes first” approach, the shoelaces on these logger work boots are designed to hold their place and the eyelets have a tight fit to reduce movement and friction that could untie the laces over time.

Here’s the difference between lace-up and pull-in work boots in case you want to learn more about it.

Stepping into the inside, you’ll find an insole that isn’t just another regular shockproof insole, it’s custom made to the shape of these boots and adds to its arch and heel support.


  • Waterproof
  • Goodyear storm welt construction
  • Steel-toed tip
  • High traction Vibram outsoles
  • Removable shock-absorbent outsoles
  • Slip-resistant 
  • Steel shank
  • Ankle support
  • Heel support


  • Not insulated
  • Can build up heat over time

9. Men’s 9″ I.N.T Waterproof Hunting Boot

Great Hunting Work Boots
From Thorogood

Built to adapt to various terrains while still being comfortable, Thorogood’s 9″ I.N.T. Leather work boots are the perfect choice for hunters and workers that require boots that can keep up with different environments.

Featuring a top-of-the-class slip-resistant Vibram outsole and a waterproof membrane, avoiding puddles because you’re worried about soaking up your feet will be a thing of the past in these work boots.

Packing in 440 grams of insulation, these work boots manage to be comfortable, warm, a reliable choice for crossing into snowy terrains or muddy grounds be it to follow prey into the foods or to carry equipment through a storm.

For a wider selection of warm boots, check out our round-up of the best work boots for the winter season.

Secured by heavy stitching to keep the boot together, the insides of these boots do not disappoint either since they feature Thorogood’s renowned comfortable footbeds and removable insoles that adjust to the foot’s shape with every step.


  • Littleway construction
  • 440-gram insulation
  • Ankle support
  • Waterproof


  • Not suitable for extremely cold weather
  • No toe protection

10. Crosstrex Series Side Zip BBP Waterproof 6″ Hiker

Best Thorogood Hiking Work Boot

Designed from the ground up for the agile worker that needs to get around quickly, these work boots blend in the lightweight features of an athletic shoe with the safety and protection of a work boot.

These work boots are all about getting the job done fast all the way from the moment you slip them on and zip them up.

As much as they might look like sneakers, don’t let first impressions fool you.

The Crosstrex Series – 6″ BBP work boots are abrasion-resistant, slip-resistant, waterproof, and even blood-born pathogen-resistant.

Not to mention featuring composite toe tip and a durable cement construction to let the boot withstand extreme conditions in gravel-filled job sites and jaded tracks. 

These boots are meant to let you walk and confidently at that too without having to deal with a sore foot.

And that’s thanks to the removable single-density polyethylene footbed that lines the cushioned insole that’s backed up with a breathable lining to let your feet remain dry while you’re on the clock.


  • Cement construction
  • Composite shank
  • Waterproof
  • Blood-born pathogen resistance
  • Composite safety toe
  • Removable footbed
  • Slip-resistant outsole
  • Abrasion-resistant 
  • Cushioned midsole


  • Not insulated

11. Deuce Composite Toe Side-Zip Waterproof Boots

Deuce Work Boots: Another Tactical Work Boots From Thorogood

Leaning closer to tactical boots but nevertheless, a work boot designed to venture into the roughest terrains and extreme environments sites, the Deuce Series 8-inch boots are constructed with reinforcement across the foot to tackle any obstacle that can impede a worker on the job.

Featuring a rugged lug and dual-density Z Trac EVA impact pad outsole that lets liquids flow through the grooves without getting trapped underneath, these boots are designed to provide extended safety for hours on end even in the most hostile environments.

Alongside being waterproof, shock-resistant, slip-resistant, and having a cement construction, these boots go all the way to being blood-borne pathogen resistant – which just goes to show the amount of detail and effort that Thorogood put to create the ultimate safety boot.

The interior of these beyond-heavy-duty work boots doesn’t disappoint either, similarly to other top-of-the-line work boots from Thorogood, the insides are padded and feature a top-of-the-line removable EVA footbed that adjusts itself to every step to provide comfort at all times while still being breathable.


  • Cement construction
  • Waterproof
  • Composite toe tip
  • Composite shank
  • Z-Trac outsoles
  • Removable EVA footbed
  • Full-grain leather/400g air mesh uppers
  • Slip-resistant 
  • Blood-borne pathogen resistant


  • Not insulated
  • Leans on the heavier side

12. Men’s Wellington Metatarsal Guard I-MET2

Thorogood Insulated Work Boots

Featuring a unique design that protects the feet from all angles with a metatarsal guard that’s fully integrated with the boot’s protective toe cap, the I-MET2 work pushes the limits of toe protection and extends it to the rest of the foot.

Making it by every definition a must-have for workers dealing with heavy and sharp objects regularly who need more than just added protection for their toes.

Thorogood’s I-MET2 aren’t just packing heavy-duty protection from the inside though, these work boots are made out of durable full-grain waterproof leather across the upper while the outsoles guarantee a steady grip while being chemical-, oil-, and slip-resistant all at once.


  • Metatarsal guard integrated with the composite toe cap
  • Removable 
  • Composite shank
  • I-MET2 Chevron outsole
  • Waterproof


  • Not insulated
  • Leans on the heavier side

Bottom line: Is Thorogood a good work boot brand to buy?

Simply put, yes, and not just because we happen to like what we’ve seen after checking out all the reviews to make this article, but it’s the fact that even if you don’t like a specific model of their boots, there are plenty others to check out.

Thorogood has anything but a shortage of options for the working man and woman to choose from no matter the industry they’re in.

And the fact that they specialize in work boots and are one of the few brands that still produce most of their boots in the US makes them the perfect choice for people who crave authentic American quality boots that won’t quit halfway right when they’re needed most.

The only thing left to ask now though is, which one will you go for the next time you’re on the lookout for a new pair of work boots?

Editor’s Choice

Best Thorogood Safety Work Boot

We’ve put together a list of the top 12 work boots from Thorogood and our #1 recommendation based on what we’ve found in our research is the Thorogood Men’s American Heritage 6″ Moc Toe with wedge sole.

Team Members Working On This Page

Adrian – Web Master / Construction Professional

Construction Professional, driver, crane operator, cleaner, head chef … these are just some of the jobs I did in the past. Working in all these different environments taught me that having good footwear to protect your feet from different dangers at work IS PARAMOUNT for any worker! On this website, I aim to share all my knowledge and personal experience in dealing with different footwear and foot care issues, and hopefully, you can get something out of it. Enjoy!

Jessica Flynn
Jessica Flynn – Writer And Researcher

Love technology, going to the beach, take care of my body and writing amongst other things. You’ll see my face around here a little bit since I’m responsible for part of the research and writing of some of the articles you’re reading on I hope you’ll find our content helpful and enjoyable! See you around, thanks for reading!

Theo Cox / Researcher, Writer

I’m an MA student currently working on a research project for King’s College London Museum of Life Sciences alongside my MA dissertation. I have been published in my student newspaper, The Spectator, and the Adam Smith Institute. I’m doing part of the research and writing of the content you’ll read on Enjoy!